The Barley Harvest
Accessories
MAILED + S&H $9
DIGITAL PDF $7
DWG FILE $10
•
Dining Table - 29" (73.7cm) high, 36" x 36" (91.4cm x 91.4cm)
•
1 1/2" (3.8cm) pedestals made from a 2” x 10”
•
Side Table - 20" x 20" x 20" (50.8cm x 50.8cm x 50.8cm) high has 3/4" (1.9cm)pedestals
•
Planter - 29" (73.7cm) high with a 3/4" (1.9cm) pedestal
•
Two Dining Tables together will seat 6 Arm Chairs or Grandma Chairs
•
Table tops have ¼” spaces between the slats for drainage.
•
Digital pattern prints 24x36 (61cmx91cm) on a plotter
•
DWG parts are laid out on a 4’ x 6’ (20.3cm x 182.9cm) bed
•
Emailed instructions recommend 3/4” and 1 ½” stock
•
Add the ARM CHAIR PLAN (not included in this package) to the patio set
MAILED + S&H $7
DIGITAL PDF $5
DWG FILE $10
THREE PIECE PATIO
SET PLANS
ADIRONDACK
FOLDING FOOTSTOOL
MAILED + S&H $7
DIGITAL PDF $5
DWG FILE $10
•
Finished dimensions - 19"W x 23 1/2"D x 13"H (48.3cmW x 59.7cmD x 33.0cmH)
•
Can be used as a footstool or spare seating, in the upright position
•
Becomes a lounge extension against the regular low Adirondack or Folding Adirondack
•
The back leg angles, and the front legs fold under and can be locked in position
•
Can be made wider and taller to match the upright chair plans.
•
Digital pattern prints 24” x 12” (61cm x 30.1cm)
•
DWG parts are laid out on a 4’ x 6’ (20.3cm x 182.9cm) bed
•
Emailed instructions recommend 3/4” stock
•
Finished dimensions - 18 1/4"W x 30"L x 16"H
•
Digital pattern prints 24”x30” (61cmx76cm) on a plotter
•
DWG parts are laid out on a 4’ x 6’ (20.3cm x 182.9cm) bed
•
Emailed instructions recommend 3/4” stock
ADIRONDACK
TABLE PLANS
MAILED + S&H $7
DIGITAL PDF $5
DWG FILE $10
•
Finished dimensions - 34"W x 37"D x 45 1/2"H (86.4cmW x 94cmD x 115.5cmH)
•
Converts the Grandpa Chair plans to the Grandpa Rocker
•
Only 4 parts included in this plan…the rest of the parts are included with the Grandpa Chair plan
•
Digital pattern prints 24”x36” (61cmx92cm) on a plotter
•
DWG parts are laid out on a 4’ x 6’ (20.3cm x 182.9cm) bed
•
Emailed instructions recommend 3/4” stock, 1 1/4” and 1 1/2” laminated for the rocker blades
GRANDPA’S ROCKER
CONVERSION KIT PLANS
NANA’S ROCKER
CONVERSION KIT PLANS
MAILED + S&H $7
DIGITAL PDF $5
DWG FILE $10
•
Finished dimensions - 28"W x 31 1/2"D x 34 3/4"H (71.1cmW x 80cmD x 88cmH)
•
The leg patterns can be cut to 3 heights for Customers with longer legs
•
Converts the Tall Chair plans to the Nana’s Rocker
•
Only 3 parts included in this plan…the rest of the parts are included with the Tall Chair plan
•
Digital pattern prints 24”x32” (61cm x 81.3cm) on a plotter
•
DWG parts are laid out on a 4’ x 6’ (20.3cm x 182.9cm) bed
•
Emailed instructions recommend 3/4” and 1 1/2”
© Copyright 2007 ongoing, The Barley Harvest, All Rights Reserved Made with Xara
OTHER PLANS AVAILABLE
LOW UPRIGHT TALL CHILDREN’S ROCKERS BEACH OTHER
